The 10000 kVA substation transformer is built for primary distribution service, stepping medium- or high-voltage supply down to a distribution or utilization voltage. It is supplied with throat or bus connections for integration into a switchgear lineup. At 10000 kVA it operates as a distribution substation transformer with full radiator banks and high-voltage bushings.
Specifications
| Rating | 10000 kVA |
|---|---|
| Phase | Three phase |
| Primary voltage class | 115kV / 138kV / 15kV / 161kV / 25kV / 35kV / 46kV / 69kV |
| Secondary voltage class | 12470V / 24940V / 34500V / 4160V |
| Basic insulation level (BIL) | 550 kV / 650 kV / 95 kV / 750 kV / 125 kV / 150 kV / 250 kV / 350 kV |
| Frequency | 60 Hz |
| Temperature rise | 65 °C |
| Winding material | Aluminum |
| Insulating fluid | Mineral oil, Type I |
| Cooling class | ONAN |
| Taps | Plus/minus 2 x 2.5% full-capacity below and above nominal |
| Enclosure | Munsell Green 7GY3.29/1.5, tamper-resistant |
| Feed configuration | Per application |
| Standards | ANSI/IEEE C57.12, NEMA, DOE 2016 efficiency |
| Lead time | As little as 10 weeks |
Available voltage configurations
The 10000 kVA is offered in 58 primary and secondary voltage combinations. Price is set by voltage class, so every voltage within a class carries the same price – a 12470Y/7200 primary and a 13200Y/7620 primary are both 15 kV class and cost the same.
Primary voltages available:
- 115kV class — 115000 GrdY
- 138kV class — 138000 GrdY
- 15kV class — 4160 Delta, 4160Y/2400, 4800 Delta, 7200 Delta, 12000 Delta, 12470Y/7200, 13200 Delta, 13200Y/7620, 13800 Delta, 13800Y/7970
- 161kV class — 161000 GrdY
- 25kV class — 22900Y/13200, 24940Y/14400
- 35kV class — 34500 Delta, 34500Y/19920
- 46kV class — 46000 Delta
- 69kV class — 69000 Delta
Secondary voltages available:
- 12470V class — 12470Y/7200, 13200Y/7620, 13800 Delta
- 24940V class — 24940Y/14400
- 34500V class — 34500Y/19920
- 4160V class — 4160Y/2400
Full-load current
Rated secondary current for a 10000 kVA unit at each available secondary voltage. Use these figures for conductor, breaker and bus sizing.
| Secondary voltage | Full-load current |
|---|---|
| 12470Y/7200 | 463 A |
| 13200Y/7620 | 437 A |
| 13800 Delta | 418 A |
| 24940Y/14400 | 231 A |
| 34500Y/19920 | 167 A |
| 4160Y/2400 | 1,388 A |
Rated primary current at each available primary voltage:
| Primary voltage | Full-load current |
|---|---|
| 115000 GrdY | 50 A |
| 138000 GrdY | 42 A |
| 4160 Delta | 1,388 A |
| 4160Y/2400 | 1,388 A |
| 4800 Delta | 1,203 A |
| 7200 Delta | 802 A |
| 12000 Delta | 481 A |
| 12470Y/7200 | 463 A |
| 13200 Delta | 437 A |
| 13200Y/7620 | 437 A |
| 13800 Delta | 418 A |
| 13800Y/7970 | 418 A |
| 161000 GrdY | 36 A |
| 22900Y/13200 | 252 A |
| 24940Y/14400 | 231 A |
| 34500 Delta | 167 A |
| 34500Y/19920 | 167 A |
| 46000 Delta | 126 A |
| 69000 Delta | 84 A |
Typical applications
- Data center campus primary supply
- Utility distribution substations
- Heavy industrial primary supply
- Large renewable generation collection
Construction
Standard construction is aluminum windings in a sealed tank with mineral oil, ONAN cooled, 65 °C rise. The tank is welded and finished in Munsell Green 7GY3.29/1.5. A four-position no-load tap changer provides plus and minus two 2.5% full-capacity taps. Copper windings and natural ester fluid, including STRATA X3, are available on request.
Standards and compliance
- Built to ANSI/IEEE C57.12 and applicable NEMA standards
- Meets DOE 2016 efficiency requirements
- Factory test report supplied with every unit
- Manufactured and supported by Bear Power Solutions, Brandon, Mississippi
Frequently asked questions
What voltages is the 10000 kVA available in?
The 10000 kVA is available with 115kV / 138kV / 15kV / 161kV / 25kV / 35kV / 46kV / 69kV primary and 12470V / 24940V / 34500V / 4160V secondary. That is 58 configurations in total. Every voltage inside a class carries the same price and the same basic insulation level.
What is the lead time on a 10000 kVA?
Lead times start at 10 weeks from order confirmation, depending on configuration and current factory loading. Non-standard voltages, accessories, custom enclosure work and non-standard fluid or winding material extend that. Confirm the delivery date with Bear Power Solutions before committing to a project schedule.
Can this be supplied with a switchgear throat connection?
Yes. Substation transformers are commonly supplied with primary and secondary throat or bus connections for direct integration into a switchgear lineup. Specify the mating arrangement at time of quotation.
Can the 10000 kVA be supplied with copper windings or natural ester fluid?
Standard catalog construction is aluminum windings with mineral oil. Copper windings and natural ester fluid – including STRATA X3, Bear Power Solutions’ own Type II natural ester – are available on request. Both affect price and lead time, so request a quotation for a non-standard build.
What standards does the 10000 kVA meet?
Units are built to ANSI/IEEE C57.12 and applicable NEMA standards, and meet DOE 2016 efficiency requirements. Factory test reports are provided with every unit.
Sizing the 10000 kVA
At its lowest available secondary voltage the 10000 kVA draws 1,388 A at full load; at its highest it draws 167 A. That spread is what makes secondary voltage selection an installation-cost decision as much as an electrical one – the higher voltage cuts conductor size for the same delivered power.
Secondary current at this rating is high enough that parallel conductor runs or busway are normally required on the low-voltage side. Confirm the secondary termination arrangement and available bus space before ordering.
Choosing between 10000 kVA and adjacent ratings
Bear Power Solutions also builds the 7500 kVA below it in this family. If your load is comfortably under the 10000 kVA figure, the 7500 kVA carries lower no-load losses and a lower purchase price. Request a quote below with your actual load data and Bear Power Solutions will recommend a rating.
Request a quote
For a firm price on a 10000 kVA in a specific voltage configuration, or for a non-standard build with copper windings, natural ester fluid or custom accessories, send the details below and Bear Power Solutions will respond with a written quotation.
